|
|
Apartment house Olympus
Filipčík, Martin ; Král, Jakub (referee) ; Sedláková, Markéta (advisor)
The aim of the bachelor’s work is composition of project documentation for construction of apartment building. Object is situated on the cadastral area of Třebíč, number of bulding plot is 1037/28. Building plot is situated in the location Na kopcích on the eastern part of city. Terain is mostly planar. In the apartment bulding there are three above-ground floor and one below-ground floor. In the below-ground floor there are situated storage spaces, bicycle storage, workshop, cleaning room, storage room and technical space. In the first above-ground floor there are situated two flats and four garages. In the other below-ground floor there are always situated two flats on the floor. Structural system of this building is wall system. External below-ground wall be composed of concrete blocks and thermal insulation. External above-ground wall and inside wall be composed of lime sand blocks. Object have an external thermal contact insulation. Floor structure is designed as a cast-in-place two reinforced slab. Staircase is designed as cast-in-place reinforced construction too. The roof of the bulding is flat. Floor construction are designed as floating floor.
|
|
|
New apartment building
Křičenský, Adam ; Svoboda, David (referee) ; Čuprová, Danuše (advisor)
The subject of the bachelor’s thesis is the processing of the design documentation for execution of an apartment building. Designed building is located in Hrochův Týnec. The access to the building is from the south. The plot is flat and it disposes with parking places for nineteen cars. It is a building with three above-ground floors and partial basement that is designed with a total 8 dwelling units. The structural system of the designed building is wall system. All vertical structures are made of clay brick. The exception are external walls in the basement, that is designed of concrete blocks (permanent formwork). The horizontal structures are designed of prefabricated rib-and-filler floor that is made of ceramic concrete ceiling beams, ceramic inserts and overconcrete. The conection structure of the building is the cast-in-place reinforced concrete staircase. The roof is designed as a green flat roof in combination with the walkeble flat roof. The roof above the stairwell is designed as a non-walkeble flat roof. The thermal insulation of the whole object is made of the ETICS certified contact thermal insulation system. The apperance of the building is completed by facade colours that are selected in shades of white, light gray and dark gray.
|
|
|
House with establishment
Podola, Michal ; Blahová, Pavla (referee) ; Čuprová, Danuše (advisor)
The project sloves a new family house with an establishment in a quiet location on the edge of the village Chomýž. The purpose of building is providing basic snacks for tourists and cyclists. The establishment offers indoor and outdoor seating. The house is situated in a slightly steep land near the local trails. It is a three-storey detached building with two floors. The Construction system consists of masonry Porotherm, further insulated system Baumit Open and horizontal structures Miako, also Porotherm. The roof is a part of nailed trusses with a angle of 12°. Above the building there is a single casting flat roof.
|
|
|
Multifunctional building
Filipčík, Martin ; Spáčil, Miroslav (referee) ; Sedláková, Markéta (advisor)
The aim of the diploma thesis is composition of project documentation for construction of multifunctional building. Object is situated on the cadastral area of Třebíč in the location Na kopcích on the eastern part of city. Terain is slightly sloping. In the multifunctional bulding there are four above-ground floor and one below-ground floor. In the below-ground floor there are situated technical and storage spaces. In the first below-ground floor there are two entrances, the first one for administrative part and second one for residential part. The first and second above-ground floor is used for administrative purposes. The third and fourth above-ground floor is used for living in flats. Above part of the third above-ground floor there is roof made of extensive green roof and above the fourth above-ground floor there is roof made of a flat roof with a classical order of layers with waterproofing layer made of PCV-P. There is a lift in the part of object with flats. The vertical construction system of the building is wall-mounted, supplemented with girders and columns. The ceiling structures are made of reinforced concrete monolithic slabs. The staircase is monolithic reinforced concrete.
|
|
|
The family house
Moudrá, Aneta ; Janíček, Vít (referee) ; Benešová, Romana (advisor)
The subject of presented thesis is preliminary design of a detached house with workshop, as a design documentation for future building construction. The building is located on sloping land in the village Litohrady and consists of a basement and one above ground floor. The workshop is located on the ground floor. Roofing is solved by warm flat roof construction with an inverted roof assembly. Vertical structure and horizontal load-bearing structures are made out of Ytong system, perimeter masonry of the basement floor is made out of concrete blocks of permanent formwork Best. Construction of the house is based on footings. The main entrance to the house is designed to be in the basement, workshop has its own separate entrance on the ground floor. In the basement there is a living area and utility room with double car garage. The ground floor of the house holds a private zone and workshop. Proposal for the house construction emphasizes the layout design, architectural and construction solutions to energy savings and safety in use.
|
|
|
Apartment building at the vineyard
Kocmanová, Michaela ; Janda, Lukáš (referee) ; Brzoň, Roman (advisor)
The aim of the bachelor’s work is a composition of project documentation for the construction building of apartment building. The object is situated on the cadastral area of Viničné Šumice on plot number 1912/21. The apartment building is designed as separated, three storeys, flat roof building without basement. There are eleven apartment units in total, from which one is designed for people with movement disabilities. To each apartment unit belong one basement cellar and part of a garden. There are two separated parking areas with thirteen parking places in total. The building stands on foundation strips. The construction system of the object is wall system. External walls are made of Porotherm brick blocks with thermal insulation from expanded polystyrene. The inside vertical load-bearing constructions are made of acoustic brick blocks with mortar pockets. The horizontal load-bearing constructions are made of reinforced concrete slabs. The building is roofed with single layer flat roof.
|
|
|
Apartment building
Staněk, Matěj ; Kozubíková, Ivana (referee) ; Matějka, Libor (advisor)
The subject of the bachelor's thesis is the elaboration of project documentation for the construction of an apartment building in Hradec Králové on U parku street. It is a building with four above-ground and one underground floor. The vertical load-bearing structures are made of Porotherm clay blocks, the horizontal load-bearing structures are made of MIAKO clay floor blocks, placed on ceramic-concrete ceiling joist and filled with concrete. In the basement there are garages for six cars and storage space. There are eleven residential units on the upper floors. The roof is designed as warm flat roof with growing layer.
|
|
|
Apartment building
Maršálková, Martina ; Kozubíková, Ivana (referee) ; Matějka, Libor (advisor)
This bachelor thesis processes the project documentation for the apartment building with a nearly zero energy consumption. The project of an apartment building is located in the city of Liberec, city district of Vesec and has four above-ground floors and one underground floor. The foundation of the apartment building is located in a slightly sloped terrain overlooking Ještěd and the neighborhood consists of family houses and apartment buildings. The main intention was to design comfortable, spacious and modern living space with low energy costs. The layout of apartments is suitable for families with children or for a young couple. None of the housing units are designed as barrier-free for people with limited mobility, but access to the building is wheelchair accessible and, if necessary, apartments can be changed to meet the requirements for barrier-free standards. In the basement of the building there are common areas including the gym and separate garage parking spots. Parking will be available even outside of the building, located from both sides of the building. The elementary materials used for the construction are brick and concrete from which the supporting structures of the building are made. The roof and part of the front of the building is designed to include vegetation.
|
|
|
Family House with an establishment
Macháčová, Kateřina ; Plachetský, Jiří (referee) ; Čuprová, Danuše (advisor)
The project solves a new family house with an establishment in a quiet location in the local area Loučka in Lipník nad Bečvou. Establishment is used as veterinary surgery. The building is situated in flat terrain. It is a detached building with aboveground two floors. The Construction system consists of masonry Porotherm, further insulated system Baumit Pro and horizontal structures Miako, also Porotherm. Roofs designed as single-casing flat roof with gravel flat and on two levels. The house is founded on primer passports.
|
|
|
Apartment building Skřivánek
Jalamudisová, Denisa ; Pilný, Ondřej (referee) ; Kolář, Radim (advisor)
This bachelor’s thesis processes project documentation for cunstruction works of one new apartment building in Ústí nad Labem. It is a four storey non-basement building including 10 apartments, 2 of them are intended for diasbled people. Apartments on the ground floor have barrier-free tercce and each apartment on the higher floors has a spacious balcony. Every apartment has own storage space in common areas. Masonry is designed from ceramic masonry prefabric blocks, external masonry is filled with mineral wool providing thermal insulation. The ceiling system is made from reinforced concrete slabs, roof is sloping hipped made of wooden lattice trusses.
|
guest ::
